Complete Compiled Specification.pdf - Peck Ormsby Construction

(1) All costs resulting from modifications to the structure, substrates
and/or other components as required by the proposed substitution.
Each and every cost shall be clearly delineated in the submittal.
B. Post-bid submittals:
1. Shop Drawings: Submit CAD generated shop drawings showing profiles of panel units,
details of forming, joint supports, anchorages, trim, flashings, sealants and accessories.
Show details of weatherproofing at edge terminations, show elevations, and layout of
entire work.
a. Shop drawings should indicate project layout from control gird lines and
elevations referring to the required details for each unique condition.
b. The details should show the preferred profiles and performance requirements.
Provide a watertight and structurally sound, self-draining wall panel system
that meets or exceeds the performance criteria set in the Testing Section 1.05.
2. Samples: Submit an 8" x 8" sample of panel system in the specified finish complete
with factory applied edge treatment, fabricated into units representative of the actual
system.
3. Test Reports: Submit certified test reports which meet or exceed the requirements as
described in the Testing Section 1.05. The test report shall include the following,
a. Name and location of the certified independent testing laboratory with the
contact phone numbers.
b. Date the test was performed.
c. Unit description and system name of the panel system tested. Include the test
drawings with elevations with details showing the tested panel joinery.
4. Report of Approval: ICC/EC Evaluation Report No. ESR-1114.
5. Affidavit: Certifying material meets requirements specified.
1.04 QUALITY ASSURANCE
A. Qualifications:
1. Installer qualifications: Installer experienced in performing work of this section who has
experience in wall applications similar to that required for this project.
a. Installation History: Installer shall be a firm that has at least five (5) years of
experience with exterior wall applications and has successfully completed
installations of similar scope and size to this project.
2. Fabricator Qualifications: Fabricator capable of providing field service representation
during construction, approving acceptable installer and application method.
a. Fabrication History: Panel fabricator shall assume undivided responsibility for
all components of the panel work, and shall demonstrate no less than ten (10)
years successful experience of metal panel work similar in scope and size to
this project.
3. Manufacturer Qualifications: Manufacturer experienced in performing work of this
section that has experience with the specified materials.
a. Manufacturer of the composite material must have at least ten (10) years
experience in the production of the specified composite material.
b. ICC/EC Report: Composite panel manufacturer shall have an ICC/EC
Research Report (i.e., Report ESR-1114 for Alucobond PE Core ! ).
c. Certification: Composite panel manufacturer shall have established a
Certification Program acceptable to the local Code Authorities.
d. Manufacturers of the accessories and perimeter framing extrusions must have
at least five (5) years experience in the production of their respective products.
________________________________________________________________________________________
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
COMPOSITE PANELS 07430 - 2