Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 02008 – WATER UTILITY PIPING
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 1 Summary of Work Sections, apply to this Section.
B. Codes and Standards:
1. Plumbing Code Compliance: Comply with applicable portions of National Standard
Plumbing Code pertaining to selection and installation of potable water system materials
and products.
2. Water Purveyor Compliance: Comply with requirements of Purveyor supplying water to
project, obtain required permits and inspections.
3. NFPA Compliance: Install fire water systems in accordance with NFPA 24 "Standard for
Installation of Private Fire Service Mains and Their Appurtenances".
4. Local Fire Department/Marshall Regulations: Comply with governing regulations
pertaining to hydrants, including hose unit threading and similar matching of connections.
5. UL Compliance: Provide fire hydrants that comply with UL 246 "Hydrants for
Fire-Protection Service", and are listed by UL.
1.2 SUMMARY
A. This Section includes pressure water pipes and fire systems outside the building, with the
following components:
1. Special fittings for expansion and deflection.
2. Pipes and valves.
3. Fire Hydrants.
1.3 DEFINITIONS
A. PVC: Polyvinyl chloride plastic.
B. DI: Ductile Iron pressure pipe.
1.4 PERFORMANCE REQUIREMENTS
A. Pressure Rating: 175 psi static water pressure for all pipes and fittings. Pipe joints shall be
water tight.
1.5 SUBMITTALS
A. Product Data: For the following:
1. Special pipe fittings.
2. Fire hydrants
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
WATER UTILITY PIPING 02008 - 1