10.04.2013 Views

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

Complete Compiled Specification.pdf - Peck Ormsby Construction

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

A. Provide manufacturer's warranty to the following term:<br />

1. Interior Solid Core Doors: "Full Life of Original Installation." Doors showing defects<br />

within the term of the guarantee shall be replaced at no additional cost to the Owner.<br />

B. Any core telegraphing shall be considered a defect and may be cause for rejection.<br />

PART 2 - PRODUCTS<br />

2.01 MANUFACTURER<br />

A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering<br />

products that may be incorporated in the Work include, but are not limited to the following:<br />

1. Algoma Hardwoods, Inc.<br />

2. Eggers Industries, Inc.<br />

3. Marshfield DoorSystems, Inc.<br />

4. Oshkosh Architectural Door Company<br />

2.02 WOOD DOORS<br />

A. Face veneer shall be premium grade plain sliced white maple, slip match, with matching<br />

edges.<br />

1. Adhesive: Type 1 Waterproof.<br />

B. Core shall be particleboard of average density, 28 to 32 pounds per cubic foot. Stiles shall be<br />

a minimum of 1-1/8", compatible in appearance with the face veneer. Rails shall be a<br />

minimum of 2-1/4".<br />

C. Doors shall be standard solid core. Provide U.L. labeled doors for ratings indicated.<br />

D. Provide solid blocking at rails and stiles to accommodate hardware.<br />

E. Innerblocking for Mineral Core Fire Doors:<br />

1. Supply innerblocking for all surface applied hardware. Through bolts are not<br />

accepted.<br />

F. Glazing Stops<br />

1. Rated:<br />

a. Manufacturer’s standard metal stop, field painted.<br />

2. Non-Rated:<br />

a. Wood, of the same species/compatible with door species, with mitered<br />

corners.<br />

2.03 HARDWARE PREPARATION<br />

A. Make cutouts for required hardware specified under Section 08700 from templates furnished<br />

thereunder. Factory machine and finish for all hardware. When mineral core doors are used<br />

to meet fire ratings provide adequate reinforcement to interface with hardware. Use throughbolts<br />

for attachment of hardware.<br />

2.04 FACTORY FINISH<br />

A. Factory finish doors in accordance with WDMA G-17 Finish System Description or AWI<br />

SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2,2009<br />

WOOD DOORS 08200 - 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!