Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 16500 - LIGHTING
PART 1 - GENERAL
1.1 WORK INCLUDED:
A. Provide light fixtures with lamps and accessories as herein specified and shown on the
drawings.
1.2 QUALITY ASSURANCE:
A. If the catalog number of a specified fixture should conflict with the fixture description or the
general lighting specifications, such conflicts shall be brought to the attention of the Architect
prior to bidding.
1.3 SUBMITTALS:
A. Submit product data and shop drawings for fixtures, ballasts, and lamps in accordance with
the General Conditions, Division 1, and Section 16050.
B. Verify that fixture description matches that which is indicated by the specified catalog
number.
C. All features mentioned in the fixture list shall be marked on the submitted items.
D. Submit written confirmation that dimming ballasts and dimming controls are compatible.
E. Submit Operation and Maintenance data in accordance with the General Conditions, Division
1, and Section 16050.
PART 2 - PRODUCTS
2.1 ACCEPTABLE MANUFACTURERS:
A. See Luminaire Schedule for acceptable manufacturers.
B. Requests for substitution of other products will be considered if submitted in accordance with
the General Conditions, Division 1, and Section 16050.
C. Substitution requests for fixtures equal to those specified shall include complete construction
and photometric data including, if applicable, candlepower distribution curve, spacing to
mounting height ratio, table of coefficients of utilization, isofootcandle curve, ANSI beam
spread classification, efficiency, etc.
D. Submittals and substitution requests for fluorescent fixtures shall include the sheet metal
gauge of the housing and the lens thickness, material, and pattern.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
LIGHTING Section 16500-1