Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 07240 - EXTERIOR INSULATION AND FINISH SYSTEM
PART 1 - GENERAL
1.01 SUMMARY
A. Section includes exterior insulation and finish system, class PB, including but not limited to,
finish, rigid insulation, mesh, primer, caulking and backing board when not shown on the
drawings and required by manufacturer.
B. Related Sections: Division 5 Section “Cold-Formed Metal Framing” for metal studs and
sheathing.
1.02 SUBMITTALS
A. Refer to Section 01300. Submit shop drawings which show layout, installation methods and
construction details.
B. Submit 12" x 12" sample of full system on substrate identical to project requirements for type
of finish. Sample shall be erected with same tools and techniques for actual work. Sample
shall be used as a standard for color, finish, texture, and construction detailing of actual work.
1.03 COORDINATION
A. Coordinate with trades whose work is affected by the work of this section. Notify trades of
schedule to ensure timely installation of items connected with this section.
B. Work closely with Section 07600 to assure timely erection of flashing on exposed edges of
system.
1.04 DELIVERY AND STORAGE
A. Deliver materials to site in manufacturer's original unopened packages with labels intact.
B. Store materials in accordance with manufacturer's recommendations, protected from weather
and temperatures below 40 degrees F.
1.05 QUALITY ASSURANCE
A. Manufacturer shall be a member of the Exterior Insulation Manufacturer's Association (EIMA).
B. The applicator shall be certified by the manufacturer and have five years experience in the
installation of exterior insulation finish systems.
PART 2 - PRODUCTS
2.01 MANUFACTURER & FINISH
A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering
products that may be incorporated in the Work include, but are not limited to the following:
1. Dryvit Systems Inc.
2. Sto Industries Inc.
3. Synergy
4. Master Wall Inc.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
EXTERIOR INSULATION AND FINISH SYSTEM 07240 - 1