Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 10170 - SOLID PHENOLIC PLASTIC TOILET COMPARTMENTS
PART 1 - GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 1 Specification Sections, apply to this Section.
1.02 SUMMARY
A. This Section includes the following:
1. Toilet Compartments.
2. Urinal Screens.
B. Related Sections: The following Section contains requirements that relate to this Section:
1. Division 3 Section "Cast-In-Place-Concrete" for support of floor anchored
compartments.
1.03 REFERENCES:
A. National Fire Protection Association 101 Life Safety Code 1991 Edition. Chapters 5, 6, 8-30.
B. ANSI A117.1-2003 Specifications for Making Buildings and Facilities Accessible to and
Useable by Physically Handicapped People.
C. International Building Code, 2006 edition, Chapter 11
D. ADA Accessibility Guidelines for Buildings and Facilities, Federal Register Volume 56,
Number 144, Rules and Regulations.
1.04 QUALITY ASSURANCE
A. Partitions:
l. Solid phenolic core, high pressure melamine sparkle finish surface made as an
integral part of the core. Edges to be black in color, unless noted with radius or
beveled edge. Laminated surfaces are not acceptable.
2. Approved Manufacturers:
a. Bobrick.
b. Metpar.
c. Sanymetal.
d. Global Steel
e. Or approved equal prior to bidding.
3. Compartments shall be the product of a single manufacturer.
4. Manufacturer's must comply with this specification completely.
1.05 SUBMITTALS
A. Comply with requirements of Section regarding submittals.
B. Manufacturer's Data:
1. Provide required number. copies of:
a. Product data sheets, including written independent testing laboratory
certification for National Fire Protection Association Class A.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
SOLID PHENOLIC PLASTIC TOILET COMPARTMENTS 10170 - 1