Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 08100 - HOLLOW METAL DOORS AND FRAMES
PART 1 - GENERAL
1.01 SUMMARY
A. Section includes hollow metal doors, and door frames, shown on the drawings and specified
herein.
1. Division 8 Section “Wood Doors” for wood doors installed in metal frames.
2. Division 8 Section “Finish Hardware.”
3. Division 8 Section “Glass and Glazing.”
1.02 SUBMITTALS
A. Refer to Section 01300.
B. Schedule door and frame types, using Architect's designations, showing elevations, jamb,
head, and sill details and other pertinent information.
1.03 QUALITY ASSURANCE
A. Coordinate work and scheduling of the work of this section with other trades for anchorage
and installation.
1.04 DELIVERY AND STORAGE
A. Frames and doors shall be stored in an upright position, under cover, on the building site, on
wood sills or on the floor, in a manner that will prevent rust and damage. Avoid creating a
humidity chamber by using a plastic or canvas shelter and by not venting the area covered.
Remove any damaged items from site and replace at no additional cost to Owner.
B. All metal frames and doors shall be provided by one manufacturer.
PART 2 - PRODUCTS
2.01 DOOR AND WINDOW FRAMES
A. Construct to shapes and sizes shown, meeting various wall thicknesses.
B. Materials: Pressed steel shall be free of defects impairing their strength, durability or
appearance. Frames shall conform to requirements of ANSI/SDI - 100, latest edition.
C. Metal door frames: Shall be fabricated from 16 gage steel. Frames shall be combination type
with integral stop and trim. Head assemblies to be reinforced internally at each miter joint with
16 gage channel-shaped reinforcements. Frames shall be one piece welded construction.
D. Frames shall have one welded-in floor anchor in each jamb. Three field inserted steel snap-in
anchors (maximum of 24" o.c.) shall also be provided for each jamb. Anchors shall be of
proper type for the particular construction involved (masonry, steel stud, etc.).
E. Provide angle spreader for frames during shipping, handling and installation.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
HOLLOW METAL DOORS AND FRAMES 08100-1