Complete Compiled Specification.pdf - Peck Ormsby Construction

B. Related Sections: The following Division 16 Sections contain requirements that relate to this
Section:
1. "Raceways," for raceways used for Integrated Electronic Communications.
2. ”Electrical Boxes and Fittings," for boxes, cabinets and fittings used with
communications systems.
3. Television Distribution System.
4. Data Network.
1.4 SYSTEM DESCRIPTION:
A. General: Furnish and install all equipment, accessories, and materials in accordance with
these specifications and drawings to provide a complete and operating Integrated
Intercom/Communications system for the school.
1.5 SUBMITTALS:
A. Submit complete and descriptive shop drawings indicating compliance with the specifications
herein. Submit in accordance with the General Conditions, Division 1, and Section 16050.
1. Submit equipment prints, inter-panel and intra-panel, full electronic wiring diagrams
and specification sheets for each item specified herein. Provide a tabulation of the
specification clearly comparing the submitted item with the specified item, being able
to refer to all written expressed functions and capabilities. Specification Sheets shall
be submitted on all items including cable types.
2. Shop drawings, detailing Integrated Electronic Communications Network system
including, but not limited to, the following:
a. Built-in station arrangement.
b. Equipment cabinet arrangement.
3. Wiring diagrams, detailing wiring for power, signal, and control, differentiating clearly
between manufacturer-installed wiring and field-installed wiring. Identify terminals to
facilitate installation, operation and maintenance.
4. Submit wiring diagrams showing typical connections for all equipment.
5. Provide a riser diagram for the system showing in technically accurate detail all
connections, interconnections, and all provisions available and made for adaptability
of all specified future functions. In addition, riser diagram must include all
calculations, charts, and test data necessary to demonstrate that all systems and
system components deliver the specified signals, grades, and levels at all required
points and locations.
6. Submit a certificate of completion of installation and service training
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
INTEGRATED ELECTRONIC COMMUNICATION NETWORK 16760-2