Complete Compiled Specification.pdf - Peck Ormsby Construction

thick. Provide blue tape with black printing reading "CAUTION WATER LINE BURIED
BELOW".
B. Nonmetallic Piping Label: If nonmetallic piping is used for water service, provide engraved
plastic laminate, label permanently affixed to main electrical meter panel stating "THIS
STRUCTURE HAS A NONMETALLIC WATER SERVICE".
2.2 PIPING MATERIALS
A. Refer to Part 3 "3.4 - Piping Applications" Article for applications of pipe, fitting, and joining
materials.
B. Provide piping materials and factory-fabricated piping products of sizes, types, pressure ratings,
and capacities indicated. Where not indicated, provide proper selection as determined by
Installer to comply with installation requirements. Provide sizes and types matching piping and
equipment connections; provide fittings of materials which match pipe materials used in potable
water systems. Where more than one type of materials or products are indicated, selection is
Installer's option.
C. Piping: Provide pipe fittings and accessories of same material and weight/class as pipes, with
joining method as indicated.
D. Ductile Iron Pipe: Polyethylene wrapped Ductile Iron Class 350, with cement mortar lining
complying with AWWA C104.
1. Fitting: Ductile iron AWWA C110; cement lined AWWA C104; and rubber-gasket joints,
AWWA C111.
E. Copper Tube: ASTM B 88; type K, soft-annealed temper (for 3/4" to 2" diameter pipe).
F. PVC Pipe: Ultra Blue AWWA C909 Class 200 Pipe for gasketed joints and using ASTM F 477,
elastomeric seals.
1. Fittings NPS 4 to NPS 8: PVC pressure fittings complying with AWWA C907, for
gasketed joints and using ASTM F 477, elastomeric seals.
2. Fittings NPS 10 and Larger: Ductile-iron, compact fittings complying with AWWA C153,
for push-on joints and using AWWA C111, rubber gaskets.
2.3 WATER METER
A. Water Meter, Meter Set and lid will be provided by water purveyor after payment of connection
fees.
B. Contractor to supply concrete meter box and accessories needed to make installation of water
meter.
2.4 VALVES
A. Gate Valves: UL-listed, 175 psi working pressure for 12" and smaller, 150 psi for sizes larger
than 12". Threaded, flanged, hub, or other end configurations to suit size of valve and piping
connection. Inside screw type for use with indicator post, iron body bronze mounted, non- rising
stem, solid wedge disc.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION MARCH 2, 2009
WATER UTILITY PIPING 02008 - 3