Complete Compiled Specification.pdf - Peck Ormsby Construction

SS-1 Service Sink: Kohler K-6710 "Whitby" 28" x 28" service sink, floor mounted, drain channels
(Floor type) Moen Faucet No. 8124 polished chrome faucet with vacuum breaker, hose
end with hose, bucket hook, wall brace integral stops and rough chrome
finish. Faucet to be mounted 30" above finish floor; K-8940 rim guard;
K-9146 drain with strainer for 3" connection.
DF-1 Drinking Elkay EZSTL8C, bi-level wheelchair access, wall mounted, air cooled,
Fountain: refrigerated type, to cool 8.0 gal/hr. from 80 deg. F. to 50 deg. F. with 90
(ADA) deg. F. EAT. 1/5 HP hermetic compressor, 120/1/60. 304 stainless steel
top and cabinet w/chrome plated bubbler and semi-circular wrap around
self-closing push bar operable from front and side of fountain.
HB-1 Hose Bibb: Zurn Z-1310 3/4" "Ecolotrol" non-freeze anti-syphon wall hydrant with bronze
casing and plain bronze face, provide with loose key and set screw for each
hydrant.
HB-2 Hose Bibb: Chicago Faucet No. 952 (No. 998 where connected to exposed piping) 3/4"
chrome plated hose bibb with No. 293-6 handle and 3/4" threaded outlet with
integral vacuum breaker.
TP-1 Trap Primer: PPP Inc. Model MPB-500 electronic trapprimer, 1/2” inlet and outlet, 1” air
gap fitting, solenoid valve and timer with override button, 12/1/60. Unit
assembly shall be complete in NEMA #1 metal box with access door and DU
distribution unit for 9 drains.
IMB-1 Ice Maker Box: Guy Gray BIM-875 for in-the-wall installation with concealed piping, 1/2” ball
valve. 18 gauge dipped galv. steel finish. Face plate with 20 gauge box.
(Verify mounting height with conditions).
FD-1 Floor Drain: Zurn #Z-415-4 2" cast iron drain with nickel bronze top. Drain to have deep
seal P-trap.
FD-2 Floor Drain: Zurn Z-521 3" heavy duty drain with sediment bucket, loose grate,
dura-coated cast iron body, "Duresist" grate and deep seal trap with trap
primer connection on trap.
TD-1 Trench Drain: ABT polydrain 8” wide precast polymer concrete pre-sloped drain system
with #854 ductile iron grating and 851C grating hold-down devices. Drain
shall be drilled for 3” outlet and have deep seal trap.
RD-1 Roof Drain: Roof drains shall be cast iron type with flashing collar, C.I. dome, gravel
guard, adjustable extension, sump receiver, and underdeck clamp. See plans
for sizes. J. R. Smith #1010-ARC.
RD-2 Roof Drain: J. R. Smith #1080-ARC w/2" water dam, duco cast iron body with combined
(Secondary) flashing clamp and gravel stop with underdeck clamp, adjustable extension,
___________________________________________________________________________________
____________
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
PLUMBING 15400-4