Complete Compiled Specification.pdf - Peck Ormsby Construction

SECTION 16781 - SECURITY INTRUSION DETECTION AND ACCESS CONTROL SYSTEMS
PART 1 – GENERAL
1.1 RELATED DOCUMENTS:
A. Drawings and general provisions of Contract, including General and Supplementary
Conditions and Division-1 Specification sections, apply to work of this section.
B. Division-16 Basic Materials and Methods sections apply to work specified in this section.
1.2 DESCRIPTION OF WORK
A. The security intrusion detection and access control systems is hereby defined to include, but
not be limited to equipment, raceway, outlets, coverplates, cabinets, grounding and
miscellaneous items required for complete system.
B. Refer to other Division-16 sections for requirements for raceways, trays, boxes and fittings,
and supporting devices, and other sections, as applicable.
C. Access control system head end equipment and proximity card reader with all required
accessories (door contact, request for exit, mag lock/electric strike, conduit and wiring) to be
provided as part of the base bid.
D. (2) Proximity card readers with all required accessories (door contact, request for exit, mag
lock/electric strike, conduit and wiring) to be provided as part of the alternate #1.
E. Security intrusion detection system to be provided as part of the alternate #2.
1.3 QUALITY ASSURANCE:
A. MANUFACTURERS: Firms regularly engaged in manufacture of security system equipment
and components of the types described here-in and whose products have been in
satisfactory use in similar applications for not less than 10 years.
B. INSTALLER: Qualified technicians: With at least 3 years of successful installation
experience with security systems, and shall be a Bosch Certified Security Dealer and
Readykey Pro certified.
1.4 SUBMITTALS:
A. PRODUCT DATA: Submit manufacturer's data sheets including specifications, installation
instructions, and general recommendation for each type of equipment specified.
B. SHOP DRAWINGS: Submit dimensioned drawings and wiring layout for any changes in
wiring from the layout on the drawings.
PART 2 – PRODUCTS
2.1 ACCEPTABLE MANUFACTURERS:
A. Bosch supplied by Nelson Fire System or approved equal.
SEGO LILY ELEMENTARY SCHOOL CLASSROOM ADDITION March 2, 2009
SECURITY INTRUSION DETECTION AND ACCESS CONTROL SYSTEMS 16781-1