Modelos Não Lineares do Método dos Elementos de Contorno para ...

BONNANS, J,F; GILBERT, J,C; LEMARECHAL, C; SAGASTIZABAL, C,A. (2002).
Numerical Optimization: Theoretical and Practical Aspects. Springer Verlag, Berlin
BONNET, M; MUKHERJEE,S. (1996). Implicit BEM formulation for usual and
sensitivity problems in elastoplasticity using the consistent tangent operator concept.
International Journal of Solids and Structures, 33, p. 4461-4480.
BOTTA, A. S. (1998). Cálculo de Esforços e Deslocamentos em Estruturas reticuladas
considerando-se a Mecânica do Dano para a Modelagem do Concreto Armado,
Dissertação (Mestrado) – Escola de Engenharia de São Carlos, Universidade de São
Paulo, São Carlos.
BOTTA, A. S. (2003). Método dos elementos de contorno para análise de corpos
danificados com ênfase no fenômeno da localização de deformações. Tese (Doutorado)
– Escola de Engenharia de São Carlos, Universidade de São Paulo, São Carlos.
BOUCHARD, P.O; BAY, F; CHASTEL, Y (2003). Numerical modelling of crack
propagation: automatic remeshing and comparison of different criteria, Computer
methods in applied mechanics and engineering, 192, 3887-3908.
BRAITHWAITE, F. (1854). On the fatigue and consequent fracture of metals,
Proceedings of the Institution of Civil Engineers, London, 13, 463-475.
BREBBIA, C. A. (1978a). The Boundary element method for engineers, London,
Pentech Press.
BREBBIA, C. A. (1978b). Weighted residual classification of aproximate methods.
Appl. Math. Modelling, v.2, n.3.
BREBBIA, C. A; WALKER, S. (1980). Boundary Element Techniques in Engineering,
London, Newnes-Butterworths.
BREBBIA, C. A. (1984). The Boundary Element for Engineers, London, Pentech Press.
BREBBIA, C. A; DOMINGUEZ, J. (1992). Boundary Elements – An Introductory
Course, Southampton, McGraw Hill.
BREBBIA, C.A.; GEORGIO, P. (1980). Combination of boundary and finite elements
for elastostatics. Appl. Math. Modelling, v.3, p.212-220.
BRESLER, B.; BERTERO, V.(1968). Behavior of reinforced concrete under repeated
load. ASCE, Journal of the Structural Division, Vol. 94, No. ST6, June, pp. 1567-1590.
BROEK, D. (1986). Elementary Engineering Fracture Mechanics, Kluwer Academic
Publ. Dordrecht.
BUCHER, C.H; FRANGOPOL, D,M. (2006). Optimization of lifetime maintenance
strategies for deteriorating structures considering probabilities of violating safety,
condition and cost thresholds. Probabilistic Engineering Mechanics. vol. 21, pp. 1-8.
BUDERKIN, F. M; STONE, D. E. W. (1966). The crack Opening Displacement
Approach to Fracture Mechanics in Yielding, Jour. of Strain Analysis, V.1, 145-153.
Capítulo 12 – Referências Bibliográficas ________________________________________
332