RL78/D1A User's Manual: Hardware - Renesas

Under development
Preliminary document
Specifications in this document are tentative and subject to change.
RL78/D1A CHAPTER 33 ELECTRICAL SPECIFICATIONS (L GRADE PRODUCT) (TARGET)
33.1 Absolute Maximum Ratings
TA = +25 C
Parameter Symbols Conditions Ratings Unit
Supply voltage VDD VDD -0.5 to +6.5 V
EVDD0 EVDD0 = EVDD1 -0.5 to +6.5
V
EVDD1
and -0.5 to VDD + 0.3
SMVDD0 SMVDD0 = SMVDD1 -0.5 to +6.5
V
SMVDD1
and -0.5 to VDD + 0.3
VSS VSS -0.5 to +0.3 V
EVSS0 EVSS0 = EVSS1 -0.5 to +0.3 V
EVSS1
SMVSS0
SMVSS1
SMVSS0 = SMVSS1 -0.5 to +0.3 V
Supply voltage
up/down ramp
VDDRAMP 50 V/ms
REGC pin VIREGC REGC -0.3 to +2.8
input voltage
and -0.3 to VDD + 0.3 Note1
V
Input voltage VI1 Pin group 1 -0.3 to +6.5
and -0.3 to EVDD0(EVDD1) + 0.3
V
VI2 Pin group 2 -0.3 to +6.5
and -0.3 to VDD + 0.3
V
VI3 Pin group 3 -0.3 to +6.5
and -0.3 to SMVDD0(SMVDD1) + 0.3
V
VI4 Pin group 4 -0.3 to +6.5
and -0.3 to VDD + 0.3
V
(Continue to next page)
R01UH0317EJ0004 Rev. 0.04 1244
Feb. 22, 2013