04.03.2013 Views

RL78/D1A User's Manual: Hardware - Renesas

RL78/D1A User's Manual: Hardware - Renesas

RL78/D1A User's Manual: Hardware - Renesas

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Under development<br />

Preliminary document<br />

Specifications in this document are tentative and subject to change.<br />

<strong>RL78</strong>/<strong>D1A</strong> CHAPTER 13 ASYNCHRONOUS SERIAL INTERFACE LIN-UART (UARTF)<br />

13.11 Cautions for Use<br />

(1) Execute a STOP instruction during a LIN-UART operation after stopping LIN-UART.<br />

(2) Start up the LIN-UARTn in the following sequence.<br />

Set the ports.<br />

Set PER0.LINnEN to 1.<br />

Set UFnCTL0.UFnTXE to 1, and UFnCTL0.UFnRXE to 1.<br />

(3) Stop the LIN-UARTn in the following sequence.<br />

Set UFnCTL0.UFnTXE to 0, and UFnCTL0.UFnRXE to 0.<br />

Set PER1.LINnEN to 0.<br />

Set the ports. (It is not a problem if port setting is not changed.)<br />

(4) In transmit mode (UFnCTL0.UFnTXE = 1), do not overwrite the same value to the UFnTX register by software<br />

because transmission starts by writing to this register. To transmit the same value continuously, overwrite the<br />

same value.<br />

Remark n = 0, 1<br />

R01UH0317EJ0004 Rev. 0.04 782<br />

Feb. 22, 2013

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!