RL78/D1A User's Manual: Hardware - Renesas

Under development
Preliminary document
Specifications in this document are tentative and subject to change.
RL78/D1A CHAPTER 33 ELECTRICAL SPECIFICATIONS (L GRADE PRODUCT) (TARGET)
TA = -40 to +105 C, 2.7 V VDD = SMVDD0 = SMVDD1 4.0 V, VSS = SMVSS0 = SMVSS1 = 0 V
Parameter Symbols Conditions Min. Typ. Max. Unit
Output current, high IOH1 Per pin
TA = -40 C -30 mA
TA = +25 C -25 mA
TA = +85 C -23 mA
TA = +105 C -22 mA
IOHTOTAL Total Group 3A TA = -40 C -90 mA
(When
TA = +25 C -75 mA
duty =
TA = +85 C -69 mA
70%)
TA = +105 C -66 mA
Note
Group 3B TA = -40 C -90 mA
TA = +25 C -75 mA
TA = +85 C -69 mA
TA = +105 C -66 mA
Group 100 pin TA = -40 C -90 mA
3C 80 pin TA = +25 C -75 mA
TA = +85 C -69 mA
TA = +105 C -66 mA
64 pin TA = -40 C -90 mA
48 pin TA = +25 C -75 mA
TA = +85 C -69 mA
TA = +105 C -66 mA
Group 3D TA = -40 C -90 mA
(100 pin, 80 pin) TA = +25 C -75 mA
TA = +85 C -69 mA
TA = +105 C -66 mA
Group 3E TA = -40 C -90 mA
(64 pin, 48 pin) TA = +25 C -75 mA
TA = +85 C -69 mA
TA = +105 C -66 mA
Note Total current should be decreased when duty is more than 70%. However, total current cannot be
increased even if duty is less than 70% to keep VOH/VOL specification.
R01UH0317EJ0004 Rev. 0.04 1256
Feb. 22, 2013