RL78/D1A User's Manual: Hardware - Renesas

Under development
Preliminary document
Specifications in this document are tentative and subject to change.
RL78/D1A CHAPTER 33 ELECTRICAL SPECIFICATIONS (L GRADE PRODUCT) (TARGET)
TA = -40 to +105 C, 2.7 V VDD 4.0 V, VSS = 0 V
Parameter Symbols Conditions Min. Typ. Max. Unit
VIH1 P121,P122,P123,P124
(Port or EXCLK Note 1 Input voltage, high
)
0.8VDD VDD V
VIH2 RESET 0.7VDD VDD V
VIH3 P137 0.8VDD VDD VIH3
VIL1 P121, P122, P123, P124
(Port or EXCLK Note 1 Input voltage, low
)
0 0.2VDD V
VIL2 RESET 0 0.3VDD V
VIL3 P137 0 0.4VDD V
VIHYS1 P121, P122, P123, P124
(Port or EXCLK Note 1 Input hysteresis width
0.08 V
Note 2
)
VIHYS2 RESET 0.08 V
VIHYS3 P137 0.05 0.21 V
Port 1 A
EXCLK Note 1 Input leakage current, ILIH1 P121, P122, P123, P124
high
VI = VDD
1 A
OSC 10 A
ILIH2 RESET, VI = VDD 1 A
ILIH3 P137, VI = VDD 1 A
Port -1 A
EXCLK Note 1 Input leakage current, ILIL1 P121, P122, P123, P124
low
VI = VSS
-1 A
OSC -10 A
ILIL2 RESET, VI = VSS -1 A
ILIL3 P137, VI = VSS -1 A
Notes 1. P122(EXCLK) only.
2. This spec is guaranteed by design. It is not tested when shipment.
R01UH0317EJ0004 Rev. 0.04 1260
Feb. 22, 2013