Administration Manual - B.E.S.T. Undertaking.

1809
Sr.No.50
ASSISTANT FITTER (Grade - P1/T3)
He shall be directly responsible to the Junior Engineer /
Overseer and his duties and responsibilities are as follows:
10) To carry out repairs to rolling shutters, flushing tanks and
other sanitary fittings by cutting, drilling etc.
11) To fit wash basin, geysers, water pumps, flushing tanks and
other plumbing work.
12) To carry out external and internal threading of G.I. pipes and
operate water pumps, minor repairs to pumps etc.
13) To carry out routine maintenance and minor repairs to tops,
flushing tanks and other minor pipe fittings including
removing chokes.
14) To fabricate various types of frames, clamps and other
accessories in consultation with fitter.
15) To assist the Fitter in various works.
16) To cut G.I. pipes, plain sheets, m.s. plates, angles, flats of
required dimensions and shapes for fabricating, fixing erecting
or removal of structures.
17) To erect scaffolding necessary for Fitter's job.
18) To fabricate steel reinforcement including cutting, bending,
typing and fixing in position.
Page 1809