Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
NO-LIC (No License)
Note: The
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
NO-LIC MAJ None NO License
Note:
NO-LIC MO is non-traditional in that there are no associated tests or
commands that can be executed. There are no demand tests to run.
How systems go into No-License mode
The NO-LIC MO works with the LIC-ERR MO to find any errors/violations associated with the
License File. Once a License File error occurs, LIC-ERR logs the error, raises an alarm, and
generates the following SAT login message:
“System Administration Will Be Blocked in Approximately XXX hours.
Contact Your Service Representative.”
Entry into License-Error mode starts a timer that, when expired, causes the system to enter
No-License mode (see Figure 85: License mode algorithm). When Communication Manager
enters No-License mode, the following SAT warning message displays:
“System Administration Is Blocked.
Contact Your Service Representative Immediately.”
The system also responds with these conditions:
● “LICENSE ERROR” displays on all stations and consoles when they go off-hook, but
disappears when the first digit is pressed. This display message does not interfere with the
normal use of any station or console.
● All terminal-login sessions are terminated.
● Any subsequent terminal-login sessions are limited to
- Maintenance commands.
- License File installation command.
1054 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers