Server Alarms - Avaya Support

Table 97: G250/G350 pre-configured groups 2 of 2
Group Name Security
Model
G250/G350 traps and resolutions
Security Level Read View
Name
G250/G350 Traps
WriteCommG v2 1 (noAuthNoPriv) snmpv1View snmpv1View snmpv1View
v3ReadWriteG v3 (USM) 3 (AuthPriv) v3configview v3configview v3configview
v3ReadOnlyG v3 (USM) 3 (AuthPriv) v3configview v3configview
initial v3 (USM) 1 (noAuthNoPriv) restricted restricted restricted
v3AdminViewG v3 (USM) 3 (AuthPriv) iso iso iso
Although these alarms can be viewed from the primary server, they are normally resolved from
within the Avaya G250/G350 Media Gateway. The G250/G350 generates the following traps.
Follow the error resolution procedures in Table 98: G250/G350 Traps and Resolutions to
resolve errors indicated by these traps.
Table 98: G250/G350 Traps and Resolutions 1 of 16
Enterprise Trap
ID
Name Msg
Facility
Write View
Name
Severity Description / Resolution
Trap View
Name
2 of 2
snmpTraps 1 coldStart Boot Warning The entity is reinitializing itself in such a
way as to potentially cause the alteration
of either the agent’s configuration or the
entity’s implementation.
This trap is always enabled.
snmpTraps 2 warmStart Boot Warning The entity is reinitializing itself in such a
way as to keep both the agent’s
configuration and the entity’s
implementation intact.
This trap is always enabled.
snmpTrap 3 linkDown System Warning There is a failure in one of the
communication links in the agent’s
configuration.
snmpTraps 4 linkUp System Warning One of the communication links in the
agent’s configuration has come up.
snmpTrap 5 authenticFailure Security Notification The protocol is not properly authenticated.
rmon 1 risingAlarm Threshold Warning An alarm entry has crossed its rising
threshold.
rmon 2 fallingAlarm Threshold Warning An alarm entry has crossed its falling
threshold.
frame-relay 1 frDLCIStatusChange A DLCI has been created or deleted, or
has state changes.
1 of 16
Communication Manager Release 5.0 Issue 4 January 2008 371