Server Alarms - Avaya Support

Error Log Entries
IPSV-CTL (IP Server Interface Control)
Whenever an IPSI interchange takes place, an error is logged against IPSV-CTL with a code
that conveys information about the cause of the interchange and which IPSI became active.
See the following tables to identify areas of the Alarm Log to help find the source of the
problem:
● Encoding of Error Codes for Software Requested IPSI interchange
● Aux Data Descriptions for Software-Requested Interchange,
● Error codes for set ipserver-interface
Table 244: Error Code Descriptions and Aux Data
Error Code Description Aux Data
3wxyz 1
Software requested IPSI interchange / control change 2
1. See Table 245 for encoding of the wxyz digits of the error code.
2. Control change is moving the Archangel’s functionality to or from the IPSI.
Error Codes for Software-Requested Interchanges
See Table 246
50000 Craft demand interchange of IPSI to A side See Table 246
51000 Craft demand interchange of IPSI to B side See Table 246
60000 Daily interchange of IPSI to standby failed 0
61000 Daily interchange of IPSI back to previous active failed 0
Table 245: Encoding of Error Codes for Software Requested IPSI interchange 1 of 2
Field Variable Name Value Description
w Active IPSI post
action
0 The A-side IPSI is active after the interchange.
1 The B-side IPSI is active after the interchange.
1 of 2
Communication Manager Release 5.0 Issue 4 January 2008 903