Server Alarms - Avaya Support

Automatic Transmission Test (#844-848)
See test analog-testcall in the Maintenance Commands Reference (03-300431) for the
command syntax. The command options and the associated tests which are executed for test
analog-testcall are:
Test Command Option Test executed
test analog-testcall supervision 844
test analog-testcall full 845
test analog-testcall no-selftest 846
test analog-testcall no-return-loss 847
test analog-testcall no-st-or-rl 848
These tests run on CO-TRK (Analog CO Trunk) and TIE-TRK (Analog Tie Trunk).
Table 552: Automatic Transmission Test (#844-848) 1 of 5
Error
Code
Test
Result
Description / Recommendation
1000 ABORT System resources required to run this test are not available. The port
may be busy with a valid call.
1. Enter display port location to determine the trunk group/
member number of the port.
2. Enter status trunk to determine the service state of the port. If
the service state indicates that the port is in use, wait until the port is
idle before retesting.
3. Retry the command at 1-minute intervals up to 5 times.
1001 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1 of 5
Communication Manager Release 5.0 Issue 4 January 2008 1869