Server Alarms - Avaya Support

Daily Maintenance Interference
DLY-MTCE (Daily Maintenance)
Table 186: Communication Manager SAT Command Actions lists Communication Manager
SAT administration command actions that, when active, interfere with daily maintenance.
Customer administrators frequently use these commands for routine administration of the
system.
Table 186: Communication Manager SAT Command Actions
Likely to Disrupt Less Likely to Disrupt
add backup ping
change busyout recycle
duplicate clear release
remove display reset
set enable restore
format resume
get save
list status
mark test
monitor
netstat
upgrade
Other command actions can also interfere with daily maintenance when certain qualifiers are
used in the commands, or under certain circumstances. For example, certain test commands,
when used with the modifier continuously, could interfere with daily maintenance. However,
such command actions are not typically used by customer administrators doing routine
administration, and are less likely to disrupt daily maintenance routines than are the add,
change, duplicate, remove, and set command actions.
Incomplete Command Time-Out
A command time-out feature exists on the system-parameters maintenance. The
command time-out feature improves the operation of daily maintenance by allowing
maintenance routines to run that might otherwise not run. It also helps to prevent the loss of
translations that were not saved with save translation, and were also not saved because
daily maintenance was prevented from running prior to the system reset. Highlights of the
feature include:
● Options for blank, 1, 2, 3, 4, 5, or 6 hours (the default is 2 hours)
● The blank option indicates that the feature is not active
Communication Manager Release 5.0 Issue 4 January 2008 715