Server Alarms - Avaya Support

LEDs
Testing the Duplication Memory board LEDs
When testing the LEDs, the Duplication Memory board LED should blink according to the
following pattern:
1 second red on, 1 second red off, 1 second green on, 1 second green off
and so on for a total of one minute.
If the LED shows any of the following flashing patterns, an abnormal condition is indicated.
Table 84: Duplication memory board abnormal LED conditions describes the condition and the
recommend actions to resolve it.
Table 84: Duplication memory board abnormal LED conditions
LED
Color
Behavior Indication Resolution
Red Flashes on 1 second,
off 3 seconds
in a repeating pattern
Green Flashes on 1 second,
off 3 seconds,
in a repeating pattern
Green or
Red
LED remains off
continuously
S8300/S8300B Server LEDs
The green element
is burned out
The red element is
burned out
The Duplication
Memory board is
not getting power,
or the server is
hung
Replace the server.
Replace the server.
If the server is hung, it should
automatically reboot itself. If it does
not, power it down and reboot it.
Flashed continuously The server is hung If the server is hung, it should
automatically reboot itself. If it does
not, power it down and reboot it.
The S8300 server is required for systems running Communication Manager Release 2.1 and
earlier. The S8300B is required for systems running Communication Manager Release 3.X. The
LED descriptions for both servers are the same.
In the following section, the term S8300 refers to both the S8300 and S8300B servers.
320 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers