09.12.2012 Views

Server Alarms - Avaya Support

Server Alarms - Avaya Support

Server Alarms - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 533: FIBER-LK Configuration Audit (#759) 4 of 9<br />

Error<br />

Code<br />

Test<br />

Result<br />

Description / Recommendation<br />

Configuration Audit (#759)<br />

133 FAIL No neighbor link is assigned, but the SNI has an EI neighbor.<br />

1. Enter list fiber-link to see a fiber link’s endpoints.<br />

2. Administer the SNI on a fiber link to the EI neighbor it is connected to<br />

via add fiber-link next. Or remove both fiber endpoints (i.e.,<br />

this SNI and its EI neighbor) and remove the fiber endpoints from<br />

circuit pack administration via change circuit-pack.<br />

134 FAIL No neighbor link is assigned, but the SNI has an SNI neighbor.<br />

1. Enter list fiber-link to see a fiber link’s endpoints.<br />

2. Administer the SNI on a fiber link to the SNI neighbor it is connected<br />

to via add fiber-link next. Or remove both fiber endpoints (i.e.,<br />

this SNI and its SNI neighbor) and remove the fiber endpoints from<br />

circuit pack administration via change circuit-pack.<br />

135 FAIL The SNI circuit pack cannot communicate with its assigned neighbor.<br />

1. Enter list fiber-link to see a fiber link’s endpoints.<br />

2. Check if the administered neighbor is inserted. If not, insert the<br />

neighbor circuit pack.<br />

3. Perform the Fiber link fault isolation in Chapter 4: General<br />

troubleshooting in Maintenance Procedures (03-300432).<br />

136 FAIL The Endpoint 1 SNI’s administered neighbor does not match the physical<br />

neighbor connected.<br />

1. Enter list fiber-link to see a fiber link’s endpoints. The SNI’s<br />

assigned neighbor is another SNI, but the SNI is physically connected<br />

to an EI.<br />

2. Enter list fiber-link and verify that the fiber-optic and metallic<br />

cables are installed as administered.<br />

137 FAIL The Endpoint 1 SNI’s administered neighbor does not match the physical<br />

neighbor connected.<br />

1. Enter list fiber-link to see a fiber link’s endpoints. The SNI’s<br />

assigned neighbor is an EI, but the SNI is physically connected to<br />

another SNI.<br />

2. Enter list fiber-link and verify that the fiber-optic and metallic<br />

cables are installed as administered.<br />

4 of 9<br />

Communication Manager Release 5.0 Issue 4 January 2008 1813

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!