Server Alarms - Avaya Support

ASAI Link Status Test (#1365)
ASAI Link Status Test (#1365)
This tests queries the system for the state of the TCP Tunnel Connection and the ASAI TCP/IP
link. If both the TCP Tunnel Connection and the ASAI TCP/IP Link are in the "established" state,
the test passes. The test fails otherwise. This test is run on ADJ-IP (ASAI Adjunct TCP/IP Link).
Table 611: ASAI Link Status Test (#1365)
Error
Code
Test
Result
Description / Recommendation
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
1 FAIL The ASAI Adjunct TCP/IP Link is down. The TCP Tunnel Connection is
established but the ASAI TCP/IP Link is not established.
1. Use the ping command with the IP address for the Remote Node as
specified on the ip-services form.
2. If no response is received, check the entry for the local node on the
ip-services form. If the entry is clanX, where X is the board number,
refer to the maintenance procedures for CLAN-BD (Control LAN
Circuit Pack) to clear the problem.
3. If the test continues to fail, escalate the problem.
4 FAIL The ASAI Adjunct Link is down. The ASAI Adjunct Link is established but
the TCP Tunnel Connection is not established.
1. Check the entry for the local node on the ip-services form. If the
entry is clanX, where X is the board number, refer to the maintenance
procedures for CLAN-BD (Control LAN Circuit Pack) to clear the
problem.
2. If the test continues to fail, escalate the problem.
PASS The ASAI Adjunct TCP/IP Link is up. The ASAI TCP/IP Link and the TCP
Tunnel Connection are both "established".
Communication Manager Release 5.0 Issue 4 January 2008 1993