Server Alarms - Avaya Support

ANL-LINE (8-Port Analog Line)
a low ringer impedance. Call the terminal equipment and verify that the terminal rings. If the
terminal doesn’t ring, replace it. Otherwise, enter test port location, and follow the
procedure for ONS Ringer Application Test (#48).
Aux Data 40977: no terminal equipment was connected when ringing was attempted. Run
test port location, and follow the procedure for the results of ONS Ringer Application
Test (#48).
c. Error Type 15: software audit error, does not indicate any hardware malfunction. Run the
short test sequence, and investigate errors (if any).
d. Error Type 130: the circuit pack was removed or has been insane for more than 11 minutes.
To clear the error, reinsert or replace the circuit pack.
e. Error Type 257: Associated Test #48 may cause some terminal equipment to ring briefly
during daily maintenance. If this ringing is disturbing the customer or the terminal
equipment, it should be disabled via change station extension. However, on some
releases of the software, this will disable Tests #6, 47, and 35 as well as Test #48.
f. Error Type 769: Associated Test #47 may cause a false alarm when the port is connected
to off-premises equipment, some non-voice terminal equipment, and some loop equipment.
If this causes a false alarm, use change station, and change the Tests field to n to
disable the test.
g. Error Types 1281 and 1793: See XXX-BD (Common Port Circuit Pack/Media Module).
Demand test descriptions and error codes
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Order of Investigation Short Test Sequence Long Test Sequence D/ND 1
Port Diagnostic Test (#35) X X ND
ONS Ringer Application Test (#48) X X ND
NPE Crosstalk Test (#6) X ND
Looparound and Conference Test (#47) X ND
Port Audit And Update Test (#36)
1. D = Destructive; ND = Nondestructive
X X ND
Communication Manager Release 5.0 Issue 4 January 2008 463