Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 518: BRI XID Test (#628) 3 of 4
Error
Code
Test
Result
Description / Recommendation
1187 ABORT The circuit pack, port or station may have been busied out by a
technician.
1. Look in the Error Log for Error Type 18 (busied out) for BRI-BD,
BRI-PORT, or BRI-SET.
a. If this Error Type is present for BRI-SET only, use release
station to release the station.
b. If this Error Type is present for BRI-PORT and BRI-SET, use
release port location and run the test again.
c. If the error is present for BRI-BD, BRI-PORT, and BRI-SET, use
release port location to release the circuit pack, and run
the test again.
Note: When
2012 ABORT Internal system error.
If the error is present for BRI-SET only, use release port
location to release the circuit pack, and run the test again.
If the error is present for both BRI-BD and BRI-PORT, use
release board location to release the circuit pack, and run
the test again.
Note:
you release the circuit pack, you release every port
associated with it. If ports still need to be busied out, use
busyout port location.
2. Make sure the terminal is connected.
3. Retry the command at 1-minute intervals up to 5 times.
4. If the test continues to abort, escalate the problem.
2100 Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
2. If the test continues to abort, escalate the problem.
1772 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
3 of 4