Server Alarms - Avaya Support

This test runs on the following maintenance objects:
● AC-POWER
● CABINET (Cabinet Sensors)
● CARR-POW (Carrier Power Supply)
● DC-POWER (Single-Carrier Cabinet Environment)
● EMG-XFER (Emergency Transfer)
● POWER
Table 426: Emergency Transfer Query Test (#124) 1 of 2
Error
Code
Test
Result
Description/Recommendation
Emergency Transfer Query Test (#124)
1000 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2000 ABORT Response to the test was not received within the time allowed.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to ABORT with Error Code 2000, check for system
powering problems with the PN’s A carrier. Resolve every AC-POWER
and CARR-POW (Carrier Power Supply) alarm in a multicarrier
cabinet system or DC-POWER (Single-Carrier Cabinet Environment)
alarm. Repeat the test.
3. If the test continues to ABORT with a 2000 Error Code, resolve every
MAINT (PN Maintenance Circuit Pack) error in a PN. Repeat the test.
2029
2100
2319
2500
1
17
18
20
33
65
289
2
24
90
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
FAIL The Emergency Transfer switch is in the OFF position.
1. Place the switch in the AUTO position.
FAIL The Emergency Transfer switch is in the ON position.
1. Place the switch in the AUTO position.
1 of 2
Communication Manager Release 5.0 Issue 4 January 2008 1579