Server Alarms - Avaya Support

Table 310: PPP-PT Error Log Entries 2 of 2
Error Type Aux
Data
1 (b) 0 SCOTCH Sync
Looparound
(#1275)
257 (c) 0 WRN OFF
513 (d) 0 MIN OFF
769 (e) 0 WRN OFF
1281 (f) 0
1537-8 (g) See
note
1793 to
1920 (h)
2305 to
2816 (i)
See
note
See
note
Associated Test Alarm
Level
Session Status
test (#1286)
3329 (j) 35768 TCP/IP Ping test
(#1281)
3585 (k) 0, 1 TDM Looparound
(#1285)
On/Off
Board
PPP-PT (Control LAN Packet/Port)
MIN ON test port location l r 3
MIN OFF
Recommended Action
MIN OFF test port location r 3
1
WRN
MAJ ON test port location l r 3
1. Major alarms may be downgraded to Warning alarms based on the value used in set options.
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description, and follow its procedures.
b. Error Type 1: SCOTCH Synchronous Looparound test (#1275) failed.
1. Test the port (test port location long).
2. See SCOTCH Synchronous Looparound Test (#1275) for repair procedures.
c. Error Type 257: C-LAN port detected overrun or underrun condition that may indicate a
hardware problem.
1. Test for hardware problem (test port location long).
2. See SCOTCH Synchronous Looparound Test (#1275) for repair procedures to verify
repair.
3. Clear the alarm (test port location long clear).
2 of 2
Communication Manager Release 5.0 Issue 4 January 2008 1145