Server Alarms - Avaya Support

Demand test descriptions and error codes
TIE-DS1 (DS1 Tie Trunk)
Investigate tests in the order presented. By clearing errors associated with the first test, errors
generated from other tests may also be cleared. Click on the link to see the full description of
the test, error codes, and recommended actions.
Note: For
Order of Investigation Short Test
Sequence
Long Test
Sequence
NPE Crosstalk Test (#6) X ND
Conference Circuit Test (#7) X ND
DS1 Tie Trunk Seizure Test (#136) X X ND
Port Audit And Update Test (#36) X X ND
1. D = Destructive; ND = Nondestructive
Note:
TN767B vintage 8 or 9 circuit packs, a failure of Test #136 causes a
subsequent failure of Test #7. Test #136 is part of the short sequence and
generates off-board alarms Test #7 is part of the long sequence and generates
on-board alarms. Before entering busyout, release, reset or test board
location long commands, check the vintage number of the circuit pack with
list configuration board location. If it is TN767B vintage 8 or 9, do
not use the above commands until first making sure that Test #136 passes using
test board location. Otherwise, extraneous on-board alarms may be
generated.
D/ND 1
Communication Manager Release 5.0 Issue 4 January 2008 1337