Server Alarms - Avaya Support

Schedule the download
FW-STDL (Firmware Station Download)
The new firmware image can be downloaded immediately or scheduled for a later time. Due to
the potentially large volume of switch activity as a result of the firmware download, Avaya
recommends that the download be scheduled for a time when the system will be at its lowest
possible occupancy level. This will also limit the number of stations that are aborted because
they were in use at the scheduled download time.
To schedule a station firmware download:
1. On the System Access Terminal (SAT) using craft login and password, enter
change firmware station-download
The Firmware Station-Download form displays the following:
change firmware station-download Page 1 of 1
FIRMWARE STATION-DOWNLOAD
Source File: 2420v01.bin
Schedule Download? y
Start Date/Time: 10/15/2006 20:00 Stop Date/Time: 10/15/2006 23:00
Continue Daily Until Download Complete? y
Download Station Type: 2420
Beginning Station: 85001 Ending Station: 86000
2. Select parameters for the download:
● Enter the firmware filename in the Source File field.
● If you want to schedule the download for a later date/time, enter y in the Schedule
Download Field.
- Enter a start time in the Start Date/Time field.
- Enter a stop time in the Stop Date/Time field.
- If you want to stop the firmware download at the scheduled stop date/time and resume
the next day at the scheduled start time, enter y in the Continue Daily Until
Download Complete field.
● Enter extension numbers in the Beginning Station and Ending Station fields
(maximum 1,000 stations). Only administered stations within this range with a set type
matching the Station Type (in this case, Avaya 2420 DCP sets) displayed on this page
are available for download.
3. Submit the command.
Communication Manager Release 5.0 Issue 4 January 2008 853