Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 379: Battery and Power Supply Query Test (#5) 6 of 7
Error
Code
8
(cont’d)
Test
Result
FAIL
(cont’d)
Description / Recommendation
d. If there is an alarm and every LED is OK (PWR OK and
BOK) on the rectifier modules and the BIU (Battery Interface
Unit), verify that the BIU and the RM0850 rectifiers are
seated properly (plugged in). If the BOK LED on the BIU is
OK, check the number of rectifiers serving this cabinet:
No. of carriers/cabinet No. of rectifiers/cabinet
1 2
2 3
3 3
4 4
5 4
If the number of rectifiers is correct replace the maintenance
circuit pack in the PN.
10 FAIL DC-powered cabinet: The PN’s Maintenance circuit pack is
incorrectly reporting a problem with power. Replace the suspect circuit
pack and run the test again.
AC-powered cabinet: Error codes 2 and 8 have occurred. Refer to
these descriptions. Also, refer to this test’s description for Error Code
14.
12 FAIL DC-powered cabinet: The PN’s Maintenance circuit pack is
incorrectly reporting a problem with power. Replace the suspect circuit
pack and run the test again.
AC-powered cabinet: Error codes 4 and 8 have occurred. Refer to
these descriptions. Also, refer to this test’s description for Error Code
14.
14 FAIL DC-powered cabinet: The PN’s Maintenance circuit pack is
incorrectly reporting a problem with power. Replace the suspect circuit
pack and run the test again.
AC-powered cabinet: Error codes 2, 4, and 8 have occurred. Refer to
these descriptions.
This could also indicate that the detection logic on the PN’s MAINT
(Maintenance) circuit pack is defective. Such an error will not be
detected by the respective maintenance. If many environment tests are
failing, replace the suspect circuit pack, depending on the system
configuration.
1440 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
6 of 7