Server Alarms - Avaya Support

Figure 99: Fan Removal
Error log entries and recommended actions
Table 321: RMC-ENV Error Log Entries
Error
Type
Aux
Data
Associated Test Alarm
Level
RMC-ENV (Power/Fan Sensors)
On/Off
Board
Recommended
Action
0 (a) 0 Any Any Any test environment
1 (b) Any Cabinet Temperature Query test
(#122)
MAJ ON test environment
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description, and follow its procedures.
b. Error Type 1: the power-/fan-status lead indicates that a G600 media gateway’s power
supply has detected an alarm condition. The condition can be caused by the failure of any
fan’s or any power supply’s output. If more than one G600 exists, every power-/fan-status
lead is tied together. (The fan and power lead is an O-ring of every cabinet’s status lead.)
Since an error condition on a fan’s or power supply’s output could be the result of a
temporary overload (e.g., during board insertion) or caused by the equipment’s location
(e.g., fan blockage), a single event may be an anomaly that eventually clears. However, a
repeating condition causes a major alarm.
Communication Manager Release 5.0 Issue 4 January 2008 1175