Server Alarms - Avaya Support

Table 655: Packet Count Query Test (#1630) 1 of 2
Error
Code
Test
Result
Description / Recommendation
Packet Count Query Test (#1630)
1000 ABORT System resources required to run this test are not available. The port
may be in use on a valid call.
1. Enter status station or status trunk to determine when the
port is available for testing.
2. Retry the command at 1-minute intervals up to 5 times.
1001 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals up to 5 times.
1002 ABORT The system could not allocate time slots for the test. The system may be
under heavy traffic conditions, or it may have time slots out-of-service
due to TDM-BUS errors. A system is considered under heavy traffic
when the Call Processing Occupancy is greater than 50% or when the
System Management and the Call Processing Occupancies together
exceed 65%.
1. Enter status health to view the occupancy measurements.
2. Enter display errors and resolve any TDM-BUS (TDM Bus)
errors.
3. If the system has no TDM-BUS errors and is not handling heavy
traffic, retry the command at 1-minute intervals up to 5 times.
1003 ABORT The system could not allocate a tone receiver for the test. The system
may be oversized for the number of Tone Detectors present, or some
Tone Detectors may be out of service.
1. Enter list measurements tone-receiver to see information
regarding the system’s tone receivers.
2. Resolve any TTR-LEV (TTR Level) errors.
3. Resolve any TONE-PT (Tone Generator) errors.
4. Retry the command at 1-minute intervals up to 5 times.
1007 ABORT Port is not translated.
1014 ABORT Board is not translated.
1115 ABORT Unable to allocate system resources to run this test.
1. Retry the test at 1-minute intervals a maximum of 3 times.
1 of 2
Communication Manager Release 5.0 Issue 4 January 2008 2063