Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Stand-Alone DCP Data Modules
There are two types of stand-alone DCP data modules as shown in Table 296.
Table 296: Stand-Alone DCP Data Modules
Type Name 1
Data Adapters
Interfaces to:
MPDM Modular Processor Data Module DTE (data terminals, host computers,
printers, etc.)
MTDM Modular Trunk Data Module DCE (modems, data modules, etc.)
1. Early versions of these data modules were referred to as PDMs and TDMs, respectively. Later models
are designed to provide a variety of interfaces by using interchangeable modules and are thus called
modular data modules.
TN2136 circuit packs use IDCP signaling and a DAA2 Data Adaptor (DA) to interface to DTE.
DAs can operate in either of two modes which are covered by different MOs:
Table 297: Data Adaptor Modes
DA Mode Administered as: Endpoint Maintenance
Object
Stand-Alone PDM data endpoint only PDMODULE
Linked DTDM IDT1/2 1 and optional data terminal
DIG-LINE
1. IDT1/2: Italtel Digital Telephone, Model 1 or 2 (also known as Digital Telephones TD7210 and
TD7206).
1066 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers