Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
b. Otherwise, replace the circuit pack.
5. Ping the gateway: at the command prompt, enter ping XX.XXX.XXX.XXX (the IP address
of the gateway).
When finished, enter exit at the command prompt.
Board Assembly and Cables
Figure 74: TN802 board assembly shows the circuit pack with the two additional boards
connected through the side plane.
Figure 74: TN802 board assembly
Figure notes:
4 5 6 7 8 9 10 11 12 13 14 15 16
indfmap2 KLC 031699
1. Main TN802 board
2. Texas Microsystems Inc. (TMI) board
3. Analogic board
3
4. Side plane
5. SCSA (Signal Computing System
Architecture) ribbon cable
Figure 75: TN802 board assembly and cables (side view) shows a side view of the three
boards and interconnecting cables that make up the TN802.
966 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
5
1
2
4