09.12.2012 Views

Server Alarms - Avaya Support

Server Alarms - Avaya Support

Server Alarms - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 489: Expansion Interface Reset Test (#336) 3 of 3<br />

Error<br />

Code<br />

Test<br />

Result<br />

0 NO<br />

BOARD<br />

Description / Recommendation<br />

PN Maintenance Circuit Pack Serial Link Test (#337)<br />

PASS The EI was successfully reset. Release the EI circuit pack from the<br />

busyout state by using release board location.<br />

See NO BOARD for repair procedures.<br />

PN Maintenance Circuit Pack Serial Link Test (#337)<br />

This test is destructive.<br />

This test checks the serial link from the standby EI or standby IPSI circuit pack to the PN’s<br />

Maintenance circuit pack. If there is no standby link or the standby link is down at the time of the<br />

test, this test aborts.<br />

Note:<br />

Note: The status of the link changes to “down” when the standby EI or standby IPSI<br />

circuit pack begins initialization tests (for example, after being reset). The link<br />

status updates at the conclusion of these tests.<br />

This test runs on MAINT (PN Maintenance Circuit Pack).<br />

Table 490: PN Maintenance Circuit Pack Serial Link Test (#337) 1 of 2<br />

Error<br />

Code<br />

1000<br />

2029<br />

2500<br />

Test<br />

Result<br />

Description / Recommendation<br />

ABORT System resources required for this test are not available.<br />

Internal system error.<br />

Internal system error.<br />

1. Retry the command at 1-minute intervals up to 5 times.<br />

3 of 3<br />

1 of 2<br />

Communication Manager Release 5.0 Issue 4 January 2008 1715

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!