Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 384: Local Loop Test (#13) 8 of 9
Error
Code
Test
Result
Description / Recommendation
15 FAIL The control channel between the processor and the circuit pack is not
transmitting properly.
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator or Tone
Detector circuit pack.
3. If both circuit packs are functioning properly and the test still fails,
ADX8D-PT and ADX16D-P: Shut down AUDIX and replace the
EMBEDDED AUDIX circuit pack.
DIG-LINE, E-DIG-ST, PDMODULE, and TDMODULE: Replace
the Digital Line circuit pack.
16 FAIL The secondary information channel is not transmitting properly.
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator or Tone
Detector circuit pack.
3. If the Tone Generator and the Tone Detector circuit packs are
functioning properly and the test still fails,
ADX8D-PT and ADX16D-P: Shut down AUDIX and replace the
EMBEDDED AUDIX circuit pack.
DIG-LINE, E-DIG-ST, PDMODULE, and TDMODULE: Replace
the Digital Line circuit pack.
None FAIL ADX8D-PT and ADX16D-P: The test failed for reasons external to the
EMBEDDED AUDIX circuit pack.
1. Check the Tone Generator and the Tone Detector circuit packs by
entering test board location for these circuit packs.
2. Resolve any problems detected on the Tone Generator or Tone
Detector circuit pack.
3. If both circuit packs are functioning properly and the test still fails,
shut down AUDIX and replace the EMBEDDED AUDIX circuit pack.
1472 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
8 of 9