Server Alarms - Avaya Support

Table 425: Cabinet Temperature Query Test (#122) 3 of 6
Error
Code
Test
Result
1 FAIL
(cont’d)
Description / Recommendation
Cabinet Temperature Query Test (#122)
If some of the fans are running and some are not:
1. Replace the defective fans. If every fan can be started, wait 5
minutes and rerun the test. If the test fails again, proceed to the next
step.
2. Remove all six white 5-pin connectors on the front and back of the
fan assembly. This will cause every fan to run at high speed and the
alarm to be cleared.
S8700-series Fiber-PNC: If the alarm does not clear, a PN’s
Maintenance circuit pack is incorrectly reporting the problem. Check
for and resolve every error against MAINT (PN Maintenance Circuit
Pack), and then rerun the test.
3. One at a time, replace the 5-pin connectors and check to see if the
alarm recurs. Replace each fan whose reconnection causes a
recurrence of the alarm.
3 of 6
Communication Manager Release 5.0 Issue 4 January 2008 1575