09.12.2012 Views

Server Alarms - Avaya Support

Server Alarms - Avaya Support

Server Alarms - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 152: AUX-TRK Error Log Entries 2 of 2<br />

Error<br />

Type<br />

Aux<br />

Data<br />

769(c) 57482<br />

Associated Test Alarm<br />

Level<br />

257 Hybrid/Conference MIN<br />

WRN 1<br />

Looparound<br />

Conference test<br />

(#33)<br />

513 NPE Crosstalk Test<br />

(#6)<br />

1025 Auxiliary Trunk<br />

Diagnostic Test<br />

(#114)<br />

MIN<br />

WRN 2<br />

On/Off<br />

Board<br />

AUX-TRK (Auxiliary Trunk)<br />

Recommended Action<br />

ON test port location l r 3<br />

ON test port location l r 3<br />

WRN ON test port location r 3<br />

1. Major or Minor alarms may be downgraded to Warning alarms based on the values used in set options.<br />

2 of 2<br />

Notes:<br />

a. Error Type 0: Run the short test sequence first. If every test passes, run the long test<br />

sequence. Refer to each appropriate test’s description, and follow its recommended<br />

procedures.<br />

b. Error Type 1 with Aux Data 57481 indicates a port fault. Use an empty port if one is<br />

available until the circuit pack can be replaced.<br />

c. Error Type 1 or 769 with Aux Data 57482 indicates a fault on signaling lead, which is an<br />

off-board error. This error should only occur with loudspeaker paging. If the trunk is being<br />

used for another application, check that the administration is correct. Otherwise, check the<br />

wiring to the external equipment connected to the Auxiliary Trunk and check the external<br />

equipment.<br />

d. Error Type 15: software audit error that does not indicate any hardware malfunction. Run<br />

short test sequence, and investigate associated errors.<br />

e. Error Type 130: the circuit pack has been removed or has been insane for more than 11<br />

minutes. To clear the error, reseat or replace the circuit pack.<br />

Communication Manager Release 5.0 Issue 4 January 2008 579

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!