Server Alarms - Avaya Support

Table 121: ASAI-EPT Error Log Entries 2 of 2
Error
Type
3584-
3839 (k)
3841 (l)
4095
Aux
Data
Any None
Any None
Associated Test Alarm
Level
ASAI-EPT
ASAI-EPT (ASAI Endpoint)
1. Major alarms on this MO may be downgraded to Warning alarms based on the value used in set options.
Notes:
a. Error Type 0: Run the short test sequence first. If every test passes, run the long test
sequence. Refer to each appropriate test’s description, and follow its recommended
procedures.
b. Error Type 2: ISDN-BRI signaling protocol violation. Timers associated with layer-3
messages expired before a required response was received. In the following table, the aux
data column indicates which timer has just expired.
Aux Data Timer Type
2 First T303 (SETUP timer)
3 Second T303 (SETUP timer)
4 T305 (DISConnect timer)
5 First T308 (RELease timer)
6 Second T308 (RELease timer)
10 T316 (RESTart timer)
12 T309 (Layer-2 Failure timer)
16 TM100 (Management Information message Timer 1)
17 TM200 (Management Information message Timer 2)
102 TASAI (ASAI Routing Timer)
On/ Off
Board
Recommended action
2 of 2
The switch sent a message to an endpoint that did not respond in the time allowed. This
may be due to failure of the point-to-point signaling link or because of a problem in the ASAI
adjunct. To repair, enter test station extension and perform the associated repair
procedures for those tests.
Communication Manager Release 5.0 Issue 4 January 2008 483