Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
TBRI-BD (ISDN Trunk-Side BRI Circuit Pack)
MO Name in Log Alarm Level Initial Command to Run Full Name of MO
TBRI-BD MIN test board location long ISDN Trunk-side
BRI Circuit Pack
The TN2185 ISDN trunk-side BRI circuit pack contains eight, 4-wire ports that interface to the
network at the ISDN S/T reference point over two 64 Kb/s channels (B1 and B2) and over a
16Kb/s signaling (D) channel.
The B1 and B2 channels can be simultaneously circuit-switched or individually packet-switched.
Only one channel per trunk can be packet-switched due to PPE (Packet Processing Element)
limitations. The D-Channel is either circuit-switched or packet-switched. Packet switching uses
the PPE to combine all D-channels into a single physical channel, which is then routed via the
concentration highway to the NCE (Network Control Element) and then to the TDM bus. The
circuit-switched connections have a Mu-law or A-law option for voice and operate as 64-kbps
clear data channels. The packet-switched channels support the LAPD protocol and conform
with the CCITT Q.920 Recommendations for D-channel signaling.
Error log entries and recommended actions
Table 349: TBRI-BD Error Log Entries 1 of 2
Error
Type
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended Action
0 (a) 0 Any Any Any test board location
1 (b) Any MIN ON
257 (c) 65535 Control Channel Looparound
Test (#52)
513 (d) 4352 -
4357
769 (e) 4358
MIN ON test board location r 20
None ON
1025 (f) NPE Audit Test (#50) None ON
1291 (g) 4359 Clear Error Counters (#270) MIN ON
1294 (h) 46088 -
46096
SAKI Sanity test (#53) MIN ON See (h)
1537 (i) 46082 MIN ON
1793 (j) 46080 MIN ON
1296 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
1 of 2