Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
AC-POWER for DC-Powered Systems
Note: In
MO Name in Log Alarm
Level
Note:
a DC-powered multicarrier cabinet, the AC-POWER MO exists but serves no
functional purpose. Because the system cannot determine the type of power
used, the AC-POWER test should always pass or abort. See CARR-POW
(Carrier Power Supply) for the maintenance strategy for power components in
DC cabinets.
S8700-series Fiber-PNC supports three cabinet types for PNs: multicarrier cabinets (MCCs),
single-carrier cabinets (SCCs), and 19-inch rack mounted cabinets. Every type may be powered
by either an AC or DC power source. Environmental maintenance differs according to a
cabinet’s type and its power supply.
S8700-series IP-PNC supports 19-inch rack mounted cabinets, powered by either an AC or DC
power source.
Error log entries and recommended actions
Initial Command to Run Full Name of MO
AC-POWER WRN test environment location AC Power
Table 105: AC-POWER Error Log Entries
Error
Type
0 1
Aux
Data
Associated Test Alarm
Level
On/Off
Board
Recommended action
0 Any Any Any test environment location
513 Any AC Power Query test
(#78)
WRN OFF test environment location
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each
appropriate test’s description, and follow its recommended procedures.
424 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers