Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
ADM-CONN (Administered Connection)
MO Name in Log Alarm
Level
ADM-CONN MAJ
MIN
WRN
Initial Command to Run Full Name of MO
status administered-connection n 1 Administered
Connection
1. n is an administered connection number indicated in the PORT field of the Alarm or Error Log.
An administered connection provides an end-to-end connection between two access endpoints
or data modules residing in either the same switch or different switches. When administered,
the connection is automatically established and scheduled to be permanently active.
An error is logged whenever an administered connection fails or cannot be established. A failed
connection generates an error whether or not the connection is subsequently reestablished by
fast retry, re-dial, or auto restoration.
An alarm is logged when an administered connection cannot be established either initially or
after a connection failure. Both the alarm level (none to major) and a failure threshold can be
administered for each administered connection. An alarm is raised when either of the following
occurs:
● The number of consecutive failed attempts to establish a connection reaches the
administered threshold.
● The failure to establish a connection is due to a mistake in administration. See
Table 107: Administered Connection Error Log Entries.
Error log entries and recommended actions
Table 107: Administered Connection Error Log Entries 1 of 2
Error Type Aux Data Associated Test Alarm
Level
On/Off
Board
0, 29 Any None Any OFF None
1, 28 (a, b) Any None Any OFF None
2 (c) Any None Any OFF None
6, 21, 31, 127 (d) Any None Any OFF None
16 (a) Any None Any OFF None
Recommended
action
428 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
1 of 2