Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 553: Packet Interface Memory Checksum Test (#884) 2 of 4
Error
Code
Test
Result
Description / Recommendation
1334 ABORT The Packet Interface command queue is full. This should be a temporary
condition caused by a high rate of commands being sent to a Packet
Interface. Continued operation with a full command queue causes a
system WARM restart that may escalate to more severe restart levels.
1. Retry the command at 10-second intervals up to 5 times.
1335 ABORT Internal IPSI error. The Packet Interface module is on the standby IPSI,
so this test is not allowed to run.
1. Enter set ipserver-interface location to make the
standby Packet Interface active.
2. Rerun the test.
2000 ABORT Response to the test was not received within the allowed time.
2500 ABORT Internal system error
1. Retry the command at 1-minute intervals up to 3 times.
1874 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 4