Server Alarms - Avaya Support

Table 158: SPID Facility Test
Test
Result
Description / Recommendation
The abbreviations used in Service SPID Display have the following meanings:
BRI-SET, Various Adjuncts
FAIL No response is received from the endpoint.
1. Check the physical wiring between the switch and the endpoint or adjunct.
2. If test continues to fail, escalate the problem.
FAIL Display does not match administered port address for the endpoint or adjunct.
1. Change station administration for endpoint or adjunct to match displayed port
address.
2. If test continues to fail, escalate the problem.
PASS Display matches administered port address for the endpoint or adjunct.
For BRI endpoints:
1. Verify that the SPID values administered in the switch and the endpoint are
consistent.
2. If the SPID values are correct, replace the endpoint.
3. If test continues to fail, escalate the problem.
For ASAI adjuncts:
1. Verify that the TEI values administered in the switch and the adjunct are
consistent.
2. If the TEI values are correct, consult the recommended repair procedures of the
manufacturer for the adjunct.
3. If test continues to fail, escalate the problem.
UU Universal cabinet number (1 – 44 for PNs)
C Carrier (A,B,C,...)
SS Slot (01, 02,...)
pp port (01 – 12)
ext extension one and two (1 – 99999)
SPID service profile identifier
Communication Manager Release 5.0 Issue 4 January 2008 609