Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
Table 641: Power Supply Temperature Test (#1537) 2 of 2
Error
Code
1
2
3
Test
Result
FAIL The inlet temperature is over threshold.
The exhaust temperature is over threshold.
Both the inlet and the exhaust temperatures are over threshold.
1. Enter test board location to check the temperature.
2. If redundant power supplies are present, there may be a problem
with the backplane. Verify that each power supply can detect the
problem by using recycle carrier, specifying the slot number of
the power supply to be shut down. Refer to the notes and cautions
for this command in Maintenance Commands Reference
(03-300431) before executing recycle carrier.
3. Replace the power supply.
4. If the problem persists, check the backplane for shorts.
4 FAIL There is a hot spot temperature warning.
8 FAIL There is a hot spot temperature shutdown.
0 NO
BOARD
Description and recommendation
PASS The inlet, exhaust, and hot spot temperatures are within limits.
The power supply is administered but not detected.
1. Verify that the power supply is plugged in.
2. Replace the power supply.
2050 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
2 of 2