Server Alarms - Avaya Support

LEDs
MM342 USP Data WAN Media Module LEDs
LED Name Color Description
ALM Alarm Red ON - Media module is initializing, an alarm exists on an
interface, or there is an administration mismatch
between Communication Manager and this media
module, i.e. this media module is inserted in a slot
administered for a voice media module.
OFF - Successful media module initialization, media
module functioning properly, no alarm conditions exist.
TST Loop Green ON - Indicates that there is a local or remote loop
signal in connector (RL/LL).
ACT Active Yellow ON - PPP or FR is defined on this interface.
OFF - PPP or FR is not defined on this interface.
CON Connection Green ON - Interface is up.
OFF - Interface is shutdown.
G250 LEDs
The G250 LEDs are explained in the following sections. Follow the links in the Figure Notes to
see the explanation of the LEDs on a particular G250 Media Gateway. The G250 only supports
the S8300 Server and the WAN media modules (MM340 and MM342).
● G250-Analog - includes four analog trunk ports, two analog line ports, a Fast Ethernet
WAN port, and eight PoE LAN ports.
● G250-BRI - includes two ISDN BRI trunk ports, one analog trunk port, two analog line
ports, a Fast Ethernet WAN port, and eight PoE LAN ports.
● G250-DCP - provides twelve DCP (Digital Communications Protocol) ports, four analog
trunk ports, two analog line ports, a Fast Ethernet WAN port, and two LAN ports.
● G250-DS1 - provides a T1/E1 and a PRI trunk port, enabling support of fractional T1/E1
and PRI. It also includes one analog trunk port, two analog line ports, a Fast Ethernet
WAN port, and eight PoE LAN ports.
348 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers