Server Alarms - Avaya Support

Communication Manager Maintenance Object Repair Procedures
This test runs on MODEM-PT (Modem Pool Port).
Table 417: Modem Pool Audit Test (#99)
Error
Code
Test
Result
Description / Recommendation
Any ABORT The system was not able to allocate all necessary resources to run this
test. The conversion resource was in use when the audit was performed.
No repair action is necessary unless the conversion resource was known
to be idle during the test (amber in-use LED was off) or was busied out
before the test was run. In that case, a TN758 failure condition may exist
and the following steps should be used:
1. Busyout both of the TN758 Pooled Modem conversion resources on
the circuit pack containing the failing conversion resource.
2. If the test continues to abort, replace the Pooled Modem circuit pack
and retest.
PASS The audit passed.
Sanity Handshake Test (#106)
This test checks the ability of a PN’s Maintenance circuit pack’s to respond to queries. A
message is sent to the PN’s Maintenance circuit pack. The test passes if a valid cabinet type is
returned. This test runs on MAINT (PN Maintenance Circuit Pack).
Table 418: Sanity Handshake Test (#106) 1 of 3
Error
Code
Test
Result
Description / Recommendation
ABORT Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
1000 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals up to 5 times.
2000 ABORT Response to query was not received in the allowed time.
1. Retry the command at 1-minute intervals up to 5 times.
1558 Maintenance Alarms for Avaya Communication Manager, Media Gateways and Servers
1 of 3