Server Alarms - Avaya Support

Error log entries and recommended actions
Table 118: ANN-PT Error Log Entries
Error
Type
Aux
Data
Associated test Alarm
Level
On/Off
Board
ANN-PT (Announcement Port)
Recommended action
0 (a) 0 Any Any Any test port location
1 Playback Speech
Memory Array
(PSMA) Test (#206)
MIN ON test port location r 3
18 0 The port was busied
out
WRN OFF release port location
130 (b) None WRN ON test port location
257 Channel
Administration
Memory Array
(CAMA) Test (#205)
17667 inline error
513 140AY Channel
Sanity Inquiry Test
(#222)
17684 inline error
769 (c) None
MINOR ON test port location l r 3
MINOR ON test port location r 3
Notes:
a. Error Type 0: Run the short test sequence first. If all tests pass, run the long test sequence.
Refer to the appropriate test description and follow the recommended procedures.
b. Error Type 130: the circuit pack has been removed or has been insane for more than 11
minutes. To clear the error, reinsert or replace the circuit pack.
c. Error Type 769 is logged and the port is alarmed when an alarm is raised on the
Announcement circuit pack because of a faulty condition with a common circuit pack
resource. Any one of the following alarmed errors on the Announcement circuit pack causes
this error to be logged against the Announcement Port: 1793, 2049, 2305, 2561. Follow the
ANN-BD (Announcement circuit pack) repair procedures to resolve these alarms. When the
corresponding circuit pack alarm is cleared, this alarm clears.
Communication Manager Release 5.0 Issue 4 January 2008 475